Hot Melt Adhesives - 320 - Page 2 - Super Savings! Save up to 39%

You Save: 13%

mpn: 4YR49,

Hot Melt Glue Stick, Glue Stick Capacity 1/2 Inch, Number of Sticks in Box 24, General Purpose, 10 Inches Length, White In Chip Board Box, Package 24.

mpn: 5742box, ean: 0705377740596,

Comes with around 82 Pieces hot glue gun sticks, stable and easy to use - Just insert and go ahead!Hot glue stick is 0.44 Inch Diameter and 10 Inch Lengthhot melt glue sticks for hot glue gun with different temperatures, which are great for projects, crafts, arts, designing and DIYsHot melt glue gun with strong adhesive, good flexibility and luster, durability for daily gluing projectsFits most full-size glue guns.

mpn: OLSDX-509448, ean: 4894660693162,

Quantity :1 pieceMaterial :ABSDimensions :9.84 in x 3.86 in x 1.1 in (25 cm x 9.8 cm x 2.8 cm)Weight :3.28 oz (93 g)Packing List:1 x Hot melt glue gunEasy to use. High quality.

mpn: 160411, ean: 4894681082037,

* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration. TOOGOO(R) 120Pcs/Lot 7mm x 100mm Hot Melt Glue Sticks For Electric Glue Gun Craft Album Repair Power Tools For Alloy AccessoriesMaterial: EVAPackage contents: 120 pcs * Hot Melt Glue Sticks (does not contain other things)Only the above package content, other products are not included.Note: Light shooting and different displays

mpn: 160411, ean: 0192948109560,

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration. SODIAL(R) 120Pcs/Lot 7mm x 100mm Hot Melt Glue Sticks For Electric Glue Gun Craft Album Repair Power Tools For Alloy AccessoriesMaterial: EVAPackage contents: 120 pcs * Hot Melt Glue Sticks (does not contain other things)Only the above package content, other products are not included.Note: Light shooting and different displays

mpn: 4600045, ean: 0701413786023,

PAINTLESS DENT REPAIR STEPS: 1.Clean where with dents 2.Heat glue sticks with glue gun ,sticks will be melted in 3 min and then spread the glue evenly on the suitable tabs 3.In 5-10 minutes, after the glue dried, use dent lift or T bar or I bar tool to connect tab, adjust screw on the top of dent lift, if you use T bar or I bar tool, tighten the handle portion, force the middle of the slide hammer impact Backwards. 4.If there is a smaller dent, you can continue to use smaller tab. repeat the

You Save: 39%

mpn: 43005, ean: 0698158430055,

The melting temperature of Type 1 is between 340 to 350 degrees F. Set time is less than 60 seconds. Five pound poly bag packaging means easy handling and storage.Precision Brand Hot Melt Strippable Protective Coating protects items from damage during shipping and handling and from rust and corrosion during long-term storage. Used to protect cutting tools, saw blades, gages, gears, and various other parts. Type 1 has an Ethylcellulose base. Coating is presliced into manageable pieces. To

ean: 0663591175238,

Product power: 30W Gun mouth material: aluminum Gun mouth diameter: 1.5mm Working voltage: 110V Wire length: 1.4m PRACTICALITY: Heating quickly, a fast plastic, suitable for a variety of workplaces, can also be used for glass, ceramics, wood, cloth, paper, plastic and other items, but also to fill gaps in windows and doors, patch floor tiles, DIY handmade jewelry And linked to the paste. Precautions: 1、Do not open the switch when not in use for a long time to place. 2、A plastic mouth

You Save: 24%

mpn: FMFLEX180, ean: 0608309429210,

Fasten master has replaced the popular Ub8012 hot melt glue by PAM with Fmflex40 and FMFLEX180. The HB220 hot melt glue gun can easily create a high strength bond between carpet tack strips or metal clips and finished concrete, fiber cement backer board, or wood prior to the carpet being stretched over a floor. The major advantages in using Fmflex40 glue with the HB220 gun are strength of the bond and the quick 5- minute set up time of the adhesive. This allows the carpet installer greater

You Save: 19%

mpn: ET021, ean: 6932083826816,

Etepon multi function hand-hold portable convenient mini heat gun is a great heat tool for DIY crafts. ►High quality ABS anti-slip hand-hold part outside have high temperature resistance►The temperature control device and micro-circulation cooling system inside will always keep you safe►Heat up to 200°C/390°F quickly within few seconds►Two professional heat vents reduce the internal temperature of the heat gun and extend its life►100° adjustment stainless steel stand, flexible &

You Save: 3%

mpn: 725R10-25P,

' Hot Melt Glue Stick, Clear, Diameter 7/16 In., Length 10 In., For Use With Standard Diameter (1/2 In., 7/16 In., 0.43 In., 0.45 In.) Glue Guns, Temp. Range -20 Degrees to 140 Degrees F, Application Time 60 sec., Full Cure 24 hr., Peel Strength Not Specified, Shear Strength Not Specified, Tensile Strength Not Specified, Substrates High Temperature: Most Plastics, Metals, Wood, Carpet, Upholstery and Much More, Low Temperature: Foam, Paper and Other Delicate Materials, Characteristics General

mpn: 43120, ean: 0698158431205,

Precision Brand Hot Melt Strippable Protective Coating protects items from damage during shipping and handling and from rust and corrosion during long-term storage. Used to protect cutting tools, saw blades, gages, gears, and various other parts. Type 1 has an Ethyl cellulose base. Coating is presliced into manageable pieces. To remove, coating peels right off. The melting temperature of Type 1 is between 340 to 350 degrees F. Set time is less than 60 seconds. Thirty pound package contains six

SKU: #05113836078

sku: 05113836078, mpn: 051138-36078, ean: 0051138360788,

3MTM Abrasive ScotchkoteTM 226P Hot Melt Patch Compounds Designed to repair minor damage to Scotchkote FBE coatings. Easily applied and quick setting for immediate installation and handling. Usable in all weather conditions Pack of 1.

You Save: 19%

mpn: 605-43110, ean: 0698158431106,

605-43110 Dimensions: -Overall Product Weight:0.1Easy to use coating is presliced into manageable pieces. Hot melt strippable protective coating protects tools gauges and metal parts from nicks corrosion an. Set time is less than 60 seconds. To remove coating peels right off.

mpn: 3762 LMAE, ean: 0051115255793,

3M 3762 LM AE light amber hot melt adhesive is compatible with chipboard, foam, paper, uncoated cardboard and wood materials. Additionally, this hot melt adhesive is a low melt adhesive with a melting point of +204.8 F. Diameter of the 3762 LM AE hot melt adhesive is 0.45 in. Delivers great performance with a shear strength of 480 psi and peel strength of 6 piw.Sale Unit: CASE (POUND x 11) (POUND x 11). Brand: 3M. 3M Number: 3762 LM AE. Material Compatibility: Chipboard; Foam; Paper; Uncoated

mpn: 3762LMTC, ean: 0021200491344,

3M(TM) Hot Melt Adhesive 3762 is a 100% solids thermoplastic adhesive with excellent ''Hot Tack''..

mpn: 62376493375,

3M(TM) Hot Melt Adhesive 3764 bonds to many plastics, including polyolefins. Good impact resistance and flexibility at low temperature. See the applicator guide below for your dispensing options..

mpn: CRL30705,

Color: BlackFits Smaller Hot Melt Butyl Machine Tanks Like CRL SS96, SS88, SS7, and Aztech ATXM1Formulated to Exceed ASTM E2188, E2189, E2190 (HIGS) SpecificationsRecommended Application Temperature 350F - 400F (177C - 205C)CRL Hot Melt Butyl is easy to use in CRL SS96, SS88, Aztech ATXM1, and ATX11 dispensing systems. It is packaged in coated release boxes (16 boxes per case), and can be easily inserted into dispensers with smaller melting pots. Recommended application temperature of 350F -

mpn: 3762 TC, ean: 0021200826153,

3M JET MELT BRAND ADHESIVE 3762TC TAN 5/8X2''Rapid setting adhesive has excellent ''hot tack'' properties making it great closing cartons and b. Used to put up signs and make point of purchase displays. Works on lightly waxed cartons.

mpn: Q711-25P,

' Hot Melt Glue Stick, Tan/Amber, Diameter 5/8 In., Length 10 In., For Use With G6225082, Not For Use With 3M Glue Gun, Temp. Range -20 Degrees to 130 Degrees F, Application Time 10 sec., Full Cure 24 hr., Peel Strength Not Specified, Shear Strength Not Specified, Tensile Strength Not Specified, Substrates Most Porous Materials Such As Corrugated Cardboard, Paperboard and Wood, Great for Carton Sealing 'Price For: Each Characteristics: Excellent Hot Tack, Fast Setting, Complies with FDA