Battery Testers - 300 - Page 2 - Mega Sale! Save up to 21%

mpn: 1222, ean: 0039800011619,

Eveready Super Heavy Duty is a line of carbon zinc battery products which has powered people's battery run devices for over 100 years Broad range of device applications Environmentally responsible - no added mercury Has a broad range of device applications.This is manufactured in United States.Eveready Heavy-Duty Battery 9 Volt, 12 Pack. Eveready Super Heavy Duty is a line of carbon zinc. This is manufactured in United States.

mpn: CECOMINOD027753, ean: 0745950594567,

The DCM9030C Battery Monitor is designed to monitor performance most kind of battery systems with capacities of up to 999 Amp hours. · It can measure currents up to 30 Amps. · It is easy to enable simple DIY installation. · The unit continuously monitors voltage, charge and discharge current, number of power (charge or discharge), the remaining battery capacity, these information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure.

ean: 0709127320427,

Fit for Battery Type:12V lead-acid battery. Input current：5-10mA. Input power consumption：200-700mW. Dimension: 64*25mm.

mpn: Qianson-35W-USB, ean: 0704022166699,

.

mpn: SC-MINI, ean: 0856777000145,

ZTS Inc. Soft Carrying & Storage Pouch for the Mini-MBT & MINI-MBT9R Battery TestersDesigned for the MINI-MBT and MINI-MBT9R. Secure Velcro Flap. Protects against impact and dirt.

mpn: YTA-BTRYTESTER-BLACK, ean: 0712012156520,

Battery power is indicated by the lighting combination below - When three(red,yellow,green) lights are on,means the tested battery strength is good. - When two(red,yellow) lights are on,means the tested battery strength is weak. (You need to know a fully charged 1.2V rechargeable battery will only make tow lights on.) - When one(red) light is on,means the tested battery strength is low and can barely function. - When no light on,means the tested battery is completely exhausted and the

mpn: CECOMINOD010896, ean: 0709127318301,

If you need detailed setup information Please ask the sellerFit for Battery Type:12V lead-acid battery. Input current?5-10mA. Input power consumption?200-700mW. Dimension: 64*25mm. Do not use the DC converter?The voltmeter can work normally?The charge gauge may not operate?.

mpn: TESTER-LY6W-B, ean: 0793029098881,

Technical Parameter: Model: LY6W Type: External installation Screen Display: LCD Operating Current: < 5.0mA Max Operating Voltage: 63V Temperature Range: 0 to 40 degree Backlight: Blue Applicable Specification: Lead-acid battery: 12V, 24V, 36V, 48V; Lithium-ion battery: 3cells to 15cells; The capacity tester is used for 3-15 cells lithium-ion battery(8-63V) and lead-acid battery (12-48V). Lithium iron phosphate battery does not suitable). Users can select suitable specification by the key on

mpn: US200308,

Parameters: Measuring range: AC 80.0-300V; AC 0-100.0A Measuring accuracy: 1% ± 2digits Voltage display: Yellow LCD Current display: Blue LCD Size: 70*39*40mm Wiring: Green terminal: Voltage input Blue terminal: Current transformer secondary input Note: Please passing the wire of the measuring circuit through the hole of transformer. Important: 1. Voltage input (yellow terminal) and current transformer secondary input (blue terminal) cannot be connected to be wrong, otherwise the instrument

You Save: 21%

mpn: PS5197BK, ean: 5915903849586,

72 Battery Caddy and Tester.Caddy Holds Up to 72 Batteries.. Conveniently Store in a Drawer or Mount on a Wall.. Mounting hardware included..

You Save: 13%

mpn: SN-POW-ENY, ean: 0732140227732,

Prodcut Description: Installed in the car battery Real-time Monitoring throughReceive notification of battery conditions when enter Bluetooth rangeAlert users if charge is lowCheck vehicle cranking system automatically while engine isÂ

ean: 0732140336076,

The DCM9040 Battery Monitor The unit is designed to monitor performance most kind of battery systems, it continuously monitors voltage, discharge current, number of power, consumed amp hours, these information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure. Combines many functions in one, Dual display *Voltage (V), Power (W), Current (A), Ampere-hour (Ah), Working Hours (H). It is equipped with an internal programmable alarm, to

ean: 0711583431241,

Features: Prevents peak currents damaging battery, ESC, motors, wiring and connectors Verifies sufficient operating voltage under load Individual cell balancing.Set cutoff voltages, check battery capacity health Confirms proper battery charger operation (connect between your battery and charger) Detect receivers and actual operating current so as to make sure whether an UBEC is needed Blue backlit LCD display 2x Plug included Specifications: Operates from 4.8-60V 0V with optional auxiliary

ean: 0662225209479,

Things seem to be running a bit slow? Still running slow after you replace the batteries? Why waste time inserting and removing battery after battery when you can just test it? Never again get caught with a dead household battery. This handy digital battery tester makes it easy for you to get the most out of your batteries and lets you know when it is time to get a new one. The Battery Tester may be used to test the following sizes: 1.5V-----AAA,HP16,MN2400,RO3 AA,HP7,MN1500,UM3

mpn: UM24C, ean: 0732140396148,

This USB Tester can measure voltage, current, power, temperature and other values and display on the 1.44'' color LCD Screen. Features: 1.44 Inch color LCD display makes it easy and clear to read. Adjustable multi-angle view, more intelligent and convenient. Mini size and sandwich design structure, durable for use. Main functions: voltage/current/power/capacity/energy detection, quick charge recognition, data storage, etc. Wide applications: can be used to test power bank, charger, discharge

mpn: NTKTL142-S, ean: 0757347563520,

All Neoteck Product Comes With 18 Months US Base Warranty Specifications: Color: Blue Voltage: 0V-4V-60V 0.01V (Resolution). Current: 0-100 A peak 0.01A (Resolution). Power: 0-6554 W 0.1W (Resolution). Charge: 0-65 Ah 0.001Ah (Resolution). Energy: 0-6554 wh 0.1 Wh (Resolution). Measurement Update period: 400mS. Signal Sampling Rate: sample/s. Data Queue Sequence time: 2 seconds. In Circuit Resistance: 0.001 Ohms. Operation Current: 7 mA. Auxiliary Power Voltage: 4.0V ~ 60V Size: 8.3 x 4.7 x 2cm

mpn: PSTTL142-AU, ean: 0610877357055,

Package content : 1 x Digital LCD Battery Analyze 1 x ManualHandles 0 to 60 volts. Works on 12, 24, 36, and 48 volt battery bank systems.. Measure energy(wh),charge(ah), power(w),current(A) and voltage(V).. Accurate & precise 0.01 A current and 0.01 V voltage resolutions.. Measures peak Amps, peak Watts(except for Doc Wattson) and Voltage minimum(sag).. Rugged- handles 50A continuous and 100 A peak at 60V..

mpn: US-TR16-80V350A, ean: 0655779539963,

This Battery Monitor is designed to monitor performance most kind of battery systems with capacities of up to 999 Amp hours. Read your battery bank like a fuel gauge. Battery Status At A Glance. Combines many functions in one, these information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure. State of Charge (%),The remaining battery capacity (AH). Charge and discharge current (A), Voltage (V). Charging status indicator, looks like a

mpn: 6242501034632, ean: 6242501034632,

Aolvo Batteries Storage Organizer Box With Removable Battery Tester, Battery Storage Organizer Case Hanging Holds 98 Batteries Various Sizes For AAA, AA, 9V, C and D ZizeFeature:[PREMIUM QUALITY BATTERY CASE]--Made of durable plastic, durable and sturdy.--Simple and easy to use.Perfect 2-in-1 Solution – It can be used as a battery storage organizer and tester.--A box that holds 98 batteries, Simply insert the correct battery size into the appropriate storage slot for that size

mpn: 5356231US, ean: 0751940715812,

The Battery storage organizer can satisfy all the customer's requirements. Large space, it can receive 110 different sizes of batteries. Support more batteries for 48pcs AA, 24pcs AAA, 8pcs D Cell and 10pcs C Cell, 8pcs 9V battery and 12 batteries button. LCD battery tester, can accurately display the residual voltage. This handy digital battery tester makes it easy for you to get the most out of your batteries and lets you know when it is time to get a new one. This battery organizer storage